Furuno DS50 Doppler Speed Log

Furuno DS50 Doppler Speed Log

Display Frequency LED Readout 440 kHz Call For Direct Discount Pricing and/or click here to receive an e-mail quote!! Furuno DS50 Doppler Speed Log The Furuno DS50 is a Doppler Speed Log designed to meet the IMO Resolution, IEC specifications and other national regulations. Its three-beam transmission reduces the effect of pitch and roll for high accuracy and enables the measurement of port-starboard speed as well as fore-aft speed. Keel clearance information is provided to assist with shallow water navigation. The DS50 measures and displays the ship's over-the-ground or through-the-water speed based on the Doppler effect. Speed data can be output to external equipment such as ARPAs, INS and IBS. There are three operation modes: Ground-tracking, Water-tracking and Auto. The Auto mode continuously displays ship's speed, switching between Ground-tracking and Water-tracking automatically. The DS50 consists of a display unit, processor and transducer. The compact design of the display unit allows flexible installation on the bridge. For monitoring at remote locations, analog and digital indicators are optionally available. Ultrasonic Features High Resolution, 440 kHz Operating Frequency Stable 3-Beam Transmission , at 0, 120 and 240 degrees, 060 degree down tilt Transducer may be replaced from the vessels exterior while ship is in the water Measurement Features Fore and Aft Speed Measurement Range of -10.0 to +40.0 knots Port to Starboard Speed Range of -9.9 to +9.9 knots Total Distance Run, Log Range of 0-99999.99 NM Direction of Movement Arrows, Port, Starboard, Fore and Aft Speed Set Alarm with Contact Closure Relay Driver Output DSL Features Ground Track Speed Measurements in Depths between 1 and 200 meters Water Track Speed Measurements at 2 to 25 meters Depth Beneath the Keel Shallow Water Vessel Speed Shown with a little as 1 meter of Keel Clearance Display Track Mode Indicator Showing Ground, Water or Automatic Tracking Automatic Mode Selects Water Track in Depths in Excess of 200 meters Main Display Features Display Cabinet Designed for Flush or Bulkhead Mounting Front Panel, Adjustable Display Dimmer Self Test Program with Diagnostics and Error Displays Multiple Digital, Analog, Contact Closure and Other Output Signals Chose from a wide Variety of Optional Digital or Analog Remote Displays Complies with IMO res. A.4789(XII), IEC 1023 and other Regulations Power Requirements 110/220 VAC, 60 Hz., Single Phase, Less than 300 VA Notes DS50 or the DS50T are supplied less cables Up to 130 meters of cable may be used between the Display and Transducer Need More Info? • Product Brochure (.pdf) • Operations Manual (.pdf) • Installation Manual (.pdf)