ICOM IC-FR3000 VHF Repeater
ICOM FR3000 VHF Repeater-Base System, 150 - 174 MHz, 50 Watts, 12.5/25 kHz Channel Spacing, 32 Memory Channels, CW ID Capability, 100% Duty Cycle, Temperature Alert, 110 Volts AC
ICOM IC-FR3000 Series Repeater , Base Station
Bridging the gap between bands
50 Watt continuous full duty
cycle operation
This repeater looks as good as
it performs. A rugged heatsink, large cooling fans and a high
performance power module provide the repeater with a stable 50W
at full duty cycle operation.
Automatic battery backup
system
A built-in backup system
supports automatic switching to an external power supply (13.6V
DC) if the AC power supply fails.
Multiple CTCSS & DTCS tone
memories with multiple memory channels
Up to 16 CTCSS/DTCS tones
(TX/RX tones respectively) can be programmed in a channel. This
feature allows you to share a channel with multiple user groups.
You can also give priority/exclusive use to a specified group
simply by programming different tones to another memory channel.
Ideal for many different applications.
Built-in 2-Tone, 5-Tone, DTMF
encoder & decoder
Multiple signaling systems are
equipped as standard. These systems are fully compatible with
Icom F-series radios.
Internal space for duplexer
and isolator
The repeater has an internal
space to install a duplexer and isolator*.
The controls of the duplexer are accessible from the front of
the repeater without disassembly. Faster and easier maintenance
and adjustment is possible.
* Ask your PSICOMPANY.COM for details about
available duplexers and isolators.
Telephone interconnect capability
DTMF remote control capability
You can control the repeater
from a remote location over the air or over a phone line with
DTMF.
Optional wall mount bracket,
MB-77 and 19 inch rack mount bracket, MB-78
19-inch rack mount, MB-78 |
Installation on a wall with the
MB-77 |
Additional Features
- Master/Slave backup
operation by connecting two repeaters
- Self check function checks
for internal errors and alerts with a beep sound or with a
phone call
- Accessory connector (D-sub
25-pin) on the rear panel for trunking controller including
LTR, PassPort, SmarTrunkΙΙ and MPT1327
- Compatible with VEGA tone
remote control system
- 5-Tone relay function
- Optional Voice Scrambler
UT-109 or UT-110
- CW ID transmitter (DTMF or
5-Tone also selectable)
- Password and kill/stun
function for security
- 16-digit alphanumeric
display convenient for base station operation
- A programmable button gives
access to a customized function
All
trademarks are the properties of their respective holders.
|
|
