JRC JSB-596 with ATU and DSC and NBDP, 500 Watts

Model: JSB-596, ATU, DSC, NBDP

This product ships worldwide today
if ordered before 1:00PM (PST)
Call 1-800-826-2907 (Ext. 260)

Visa/MC/Discover/Amex

  Call with questions,
  we have answers...


  We will beat any written
  price offer over our cost!

    We will not be undersold!

JRC JSB-596 with ATU, DSC, NBDP, 500 Watts

♦	Fully Complies with GMDSS Requirements
	All the functions required by IMO resolutions A.804 (19) and A.806 (19) are equipped, and suitable for radio installations of vessels navigating A2, A3 and A4 sea areas.

♦	Inadvertent Distress Alert Protection
	The DISTRESS button is protected by a cover to prevent inadvertent distress alert transmission.

♦	Built-in Battery charger
	The Battery charger is built in PA unit and does not need another Battery charger.

♦	Åú Selfcheck Function
	A Built-in high grade selfcheck function centrally controlledusing JSB-196GM Radiotelephone ensures easy maintenance.

♦	Built-in Dummy Load for ATU Selfcheck
	The dummy load for checking the NFC-296/896 Antenna Tuning Unit (ATU) is built-in and not required to connect as extra unit.

♦	Outdoor Installable Antenna Tuning Unit
	The NFC-296 Antenna Tuning Unit can be installed outdoors such as on deck, ensuring effectiveemission of transmitter power.

Specifications

GENERAL
Frequency range	Transmit: 1.6 to 27.5MHz (100Hz steps) Receive: 0.1 to 29.9999MHz (100Hz steps)
Frequency tolerance	±10Hz or better
Emission mode	J3E (TEL), F1B (DSC/TLX), A1A (CW), H2B,H3E (AME: reception only)
User definable channels	200ch (20ch X 10 Groups)
Preset ITU channels	1722ch [ TEL:283, DSC:29, TLX:891, CW:519 ]
Scanning channel	20 user defined channels
Communication mode	Simplex and semi-duplex
Antenna impedance	50 ohms
Operating temperature	-15 to +55deg.C
Power requirement	296 : 90 to 132VAC/ 180 to 264VAC, Single-phase, 50/60Hz 596/896 : 180 to 264VAC, Single-phase, 50/60Hz 296 : Tx:2.0kVA max, Rx:0.5kVA max 596 : Tx:3.0kVA max, Rx:0.5kVA max 896 : Tx:3.5kVA max, Rx:0.5kVA max 21.6 to 31.2VDC Tx: 30A max, Rx:7A max
Compass safe distance	1.5m

TRANSMITTER
Output power (*)	AC power source: 296: 200Wpx (1.6 to 4MHz), 250Wpx (4 to 27.5MHz) 596: 400Wpx (1.6 to 4MHz), 500Wpx (4 to 27.5MHz) 896: 400Wpx (1.6 to 4MHz), 800Wpx (4 to 27.5MHz) DC power source: 100Wpx (1.6 to 4MHz), 150Wpx (4 to 27.5MHz)
Occupied bandwidth	J3E (TEL) 3kHz or better F1B (DSC/TLX), A1A (CW) 0.5kHz or better

(*)	at 10Ω+250pF Artificial antenna for1.6 to 4MHz at 50Ω Artificial antenna for 4 to 27.5MHz

RECEIVER

Receiving system

Triple superheterodyne

Intermediate frequencies

70.455MHz, 455kHz, 20.217kHz

Sensitivity (SINAD 20dB)

J3E (TEL)	6.3uV or better (1.6 to 4MHz) 3.5uV or better (4 to 27.5MHz)
F1B (DSC/TLX)	1.8uV or better (1.6 to 4MHz) 1.0uV or better (4 to 27.5MHz)

Selectivity

J3E (TEL)	6dB bandwidth 2.4 to 3kHz, 66dB bandwidth Within ±2.1kHz
F1B (DSC/TLX)	6dB bandwidth 270 to 300Hz, 60dB bandwidth Within ±550Hz

Clarifier range

±200Hz in 1Hz steps

DSC WATCHKEEPING RECEIVER
Receiving frequencies	2187.5kHz, 4207.5kHz, 6312kHz, 8414.5kHz, 12577kHz, 16804.5kHz
Receiving system	Double superheterodyne
Intermediate frequencies	40.455MHz, 455kHz
Reception mode	F1B
Sensitivity	Symbol error rate of 1% or better at 1 micro-volt input
Frequency stability	Within ±10Hz after 1-minute warm-up

DSC/NBDP TERMINAL
DSC MODEM	Communications protocol	In conformity with ITU-RM.493 and M.541
	Emission	F1B 100 baud
	Memory capacity	Received Distress messages: 20 Received Other messages: 20 Transmitted message: 11
NBDP MODEM	Communications protocol	In conformity with ITU-RM.476, M.490, M.491, M.492, M.625 and ITU-T Rec. F130
NBDP MODEM	Emission	F1B 100 baud

ANTENNA TUNER
Frequency range	1.6 to 30MHz
Power capability	NFC-296: 250Wpx (1.6 to 4MHz), 300Wpx (4 to 27.5MHz) NFC-896: 500Wpx (1.6 to 4MHz), 1000Wpx (4 to 27.5MHz)
Tuning method	Automatic tuning and preset tuning
Operating temperature	-25 to +55deg.C

BATTERY CHARGER
Charging current	20A (Ordinary charge) 10A (Equalizing charge)
Alarm function	Charge / Low voltage / High voltage alarm

DATA TERMINAL
Controlled item	NBDP function (Control the DSC/ NBDP Terminal)

Standard Components

Options

Component	Model	Q'ty	Remarks
GMDSS Console	NCU-331E/F/G	1	Standard console for JSS-296/596/896 and inmarsat-C
GMDSS Console	NCU-324E/F/G	1	Desk top console for JSS-296/596/896 and inmarsat-C
GMDSS Console	NCU-1960	1	Desk top console for JSS-296/596/896
Hand Microphone	NVT-133	1	Straight Cable(L=5m)
Hand Microphone	NVT-140	1	Curl Cable
Handset Holder	MPBP00127A	1
AF Cable	7ZCJD0073	1	For NCT-196N(L=0.3m)
Control Cable	7ZCJD0074A	1	For NCT-196N(L=0.3m)
Printer	NKG-800	1	For NCT-196N
Instruction Manual	7ZPJD0162A	1	English for JSS-296/596/896

This product was added to our catalog on Tuesday 07 October, 2008.

Product Categories

Manufacturers