Further Discounts may be available. Call us for details.
We Ship Worldwide

Model: PT-80

NewMar PT-80 Battery Charger, Phase Three Series, 12 Volt DC
Contact Information

NewMar

NewMar PT-80 Battery Charger, Phase Three Series, 12 Volt DC

The NewMar PT-80 Battery Charger, Phase Three Series, 12 Volt DC is intended for 140 to 700 amp hour capacity batteries and increases reliability through the use of redundant, independent charger modules. If one power module breaks down, you won't automatically lose power to your vessel - since each module operates independently, the others will remain operational while you replace the faulty one.

Contact us today for a free consultation!

Specifications
  • Recommended Battery Type: Gel-Cell, Flooded or Sealed Lead-Acid;
  • Input Voltage/Frequency: 90 - 264 VAC, 47-63 Hz.
  • Derate linearly from 100% output @ 105 VAC to 80% output @ 90 VAC
  • Efficiency: 85% typical
  • 6 Cell, 80-400 A-H (per installed module); 240- 1200 A-H (per system)
  • Module Bays: 3
  • Power Factor: .96-.99
  • Weight with Modules Installed: 34 lbs/15.5 kg.

Related Material

NewMar PT-80 Battery Charger Brochure
NewMar Phase Three Battery Charger ABS Certification
NewMar Online Catalog



The PT-80 Battery Charger System is safe and easy to use, with no wiring involved in replacing faulty power modules, and no special technical knowledge required, either. Simply replace the malfunctioning power module with an on hand spare or one requested from the factory and you're done.

NewMar PT-80 Battery Charger System

Serviceability
  • Change faulty modules in minutes.
  • Remaining modules stay functional, no down time.
  • System status indicators and diagnostics.
  • Universal input.
  • No technical training required.

NewMar PT-80 Features
  • Rapid charge with "smart" three phase charging design.
  • Battery type switch: gel-cell, lead-acid, AGM
  • Temperature compensated output (option)
  • Diagnostic and system indicators
  • Universal input of 90-264 VAC, 50-60 Hz.
  • Powder coated stainless steel case
The NewMar PT-80 Battery Charger, Phase Three Series, 12 Volt DC is intended for 140 to 700 amp hour capacity batteries and increases reliability through the use of redundant, independent charger modules. If one power module breaks down, you won't automatically lose power to your vessel - since each module operates independently, the others will remain operational while you replace the faulty one. Contact us today for a free consultation! ...
[Show More]


Contact us today for a free consultation!

NewMar PT-80 Battery Charger Brochure

NewMar Phase Three Battery Charger ABS Certification

NewMar Online Catalog

This product was added to our catalog on Monday 11 July, 2022.

Share with: