Further Discounts may be available. Call us for details.
We Ship Worldwide

Model: PTM-24-22

NewMar PTM-24-22 Charger System Module
Contact Information

NewMar

NewMar PTM-24-22 Charger System Module

The NewMar PTM-24-22 Charger System Module is a power module designed for NewMar's Phase Three Modular (PTM) concept. The system is considered "fault tolerant" due to its independent, redundant power module set-up - should one module malfunction, the others will still keep operating as usual, while you make the necessary module swap. The PTM-24-22 fits into a wall-mounted rack that provides space for two more modules, as well as all of the necessary diagnostic and system status indicators and the "smart" controller circuit that helps provide rapid, three stage charging.

Contact us today for a free consultation!

Specifications
  • Input Current: 3 amps @ 230VAC; 6 amps @ 115 VAC
  • Input Voltage/Frequency: 90 - 264 VAC, 47-63 Hz.
  • Derate linearly from 100% output @ 105 VAC to 80% output @ 90 VAC
  • Efficiency: 85% typical
  • Protection Features: Input Fuse, Output Fuse, Current Limiting, Over Voltage Protection, Cooling Fan, Automatic Thermal Shutdown/Recovery
  • Status Indicators: Output OK/FAULT
  • Power Factor: .96-.99
  • 6 lbs.

Related Material

NewMar PTM-24-22 Brochure
NewMar Phase Three Battery Charger ABS Certification
NewMar Online Catalog



Down time is costly and inconvenient, but unfortunately equipment failures can happen any time. The PTM-24-22 Charger System Module is designed to counteract that and boost reliability by reducing the impact a single point of failure has on the system as a whole.

NewMar PTM-24-22 Battery Charger System

Serviceability
  • No inconvenient power interruptions.
  • Faulty modules can be changed in minutes.
  • Remaining modules stay functional.
  • Universal input.
  • No technical training required.

NewMar PTM-24-22 Features
  • "Smart" three phase charging design for rapid charging.
  • Battery selector switch: gel-cell, lead-acid, AGM
  • Temperature compensated output (option)
  • Diagnostic and system indicators
  • Universal input of 90-264 VAC, 50-60 Hz.
  • Powder coated stainless steel case
The NewMar PTM-24-22 Charger System Module is a power module designed for NewMar's Phase Three Modular (PTM) concept. The system is considered "fault tolerant" due to its independent, redundant power module set-up - should one module malfunction, the others will still keep operating as usual, while you make the necessary module swap. The PTM-24-22 fits into a wall-mounted rack that provides space for two more modules, as well as all of the necessary diagnostic and...
[Show More]


Contact us today for a free consultation!

NewMar PTM-24-22 Brochure

NewMar Phase Three Battery Charger ABS Certification

NewMar Online Catalog

This product was added to our catalog on Monday 11 July, 2022.

Share with: