Further Discounts may be available. Call us for details.
We Ship Worldwide

Model: INVERTER FAQ

Frequently Asked Questions About Power Inverters
Contact Information

NewMar

Frequently Asked Questions About Power Inverters

Frequently Asked Questions About Power Inverters
1. What is a Power Inverter?

2. How can an inverter be used?

3. What is the difference between Square, Modified & Pure Sine Wave?
  a. Square Wave
  b. Modified Sine Wave
  c. Pure Sine Wave

4. What size inverter do I need?
  a. Starting Load
  b. Continuous Load

5. What is the difference between Solid State and Heavy Duty?

6. What is the difference between Automotive and Deep Cycle batteries?

7. How do I charge the battery for my inverter?

8. How long can I run the inverter on my battery?

9. Are there any safety precautions to keep in mind?

1. What is a Power Inverter?
A Power Inverter, is a DC or (battery) powered device that converts DC (Direct Current) power into AC (Alternating Current) power. The output is usually 120 VAC, 60 Hz (North American domestic power) or 230 VAC, 50 Hz, International power. psicompany.com offers other single and 3-phased outputs as well.

2. What Can I Use an Inverter For?
With a sufficient battery bank, or a large enough alternator output from your engine, and a powerful enough inverter, most anything, within certain reason, can be operated from a Power Inverter. Everyday appliances such as range tops, microwaves, power tools, TVs and DVD's, lights, audio/visual equipment, battery chargers, and computers. A heavy inrush inverter can be used to power air compressors, water pumps, heaters, ventilation fans, and air conditioners. Pure sine inverters are ideal for running sensitive computers and test equipment such as oscilloscopes, weight scales, stereos & video equipment, etc.

3.What is the Difference Between Square, Modified & Pure Sine Wave?
a. Square Wave
First, a word about Square Wave Inverters. psicompany.com does not recommend any inverters that produce a square wave. Square Wave units are less efficient, and could be harmful to some electronic equipment. Square Wave units were the pioneers of inverter development and, like much early technology, does not figure on today's Power Inverter hierarchy of usefullness.
Inverter
 b. Modified Sine Wave
The most common, general-use inverters available are of the Modified Sine Wave variety, usually available at more moderate and competitive pricing. Modified or Quasi Sine Wave output inverters are designed for efficiency while still being inexpensive to produce. Although electronically designed to emulate Pure Sine Wave output, Modified Sine Wave inverters do not offer the same perfect electrical output (see diagram below). As such, a by-product of Modified sine wave output units is electrical noise. Some lower-grade TVs and stereos use power supplies incapable of eliminating common mode noise and interference. This may cause a hum or video degradation on your monitor, radio, ssb-hf, or sound system, Injecting a grain or small amount of snow on your video picture. The main drawback with Modified sine wave inverters is that some appliances with timing devices, light dimmers, and some battery chargers, as well as variable speed devices may not work well, or indeed, may not work at all.Modified or Quasi Sine Wave output inverters are more than adequate for operating computers, drills, saws, microwaves, refrigerators, fans, pumps, and general electrical equipment including most small motors (except for some variable speed motors). For your kids to watch TV in the car, or to power lights at the summer cabin, Modified sine wave output can be quite satisfactory.
Inverter

 c. Pure Sine Wave
For any device that requires sensitive calibration, it is advisable to use a Pure Sine Wave Inverter.
Pure or True Sine Wave inverters provide electrical power similar to the output of your wall plug, which is reliable and does not produce the electrical noise interference, which may result from use of a modified sine wave unit (see Above). With its perfect sine wave output, the power produced fully assures that your sensitive loads will be correctly powered, with no interference.
Inverter

Some appliances which are likely to require Pure Sine Wave include digital clocks, battery chargers, light dimmers, variable speed motors, audio/visual equipment and computers. If your application is an important video presentation at work, opera on your $1000 sound system at the beach, surveillance video, a telecommunications application, any calibrated measuring equipment, or any other sensitive load, Pure Sine Wave is ideal for you.

4. What Size Inverter do I Need?
The size of your inverter is dependant on the load you will be powering. You will need to calculate the total (Watts or Amps) of all appliances you plan to power. Virtually all AC powered equipment will bear a label (usually placed near where the wire enters the unit), indicating how many Amps or Watts of electricity the unit uses. It is not recommended to run two heavy pieces of equipment simultaneously, such as a refrigerator and a microwave or a vacuum cleaner and a microwave, unless a very large capacity inverter is being used.  A 100-Watt light bulb consumes just under 1 Amp of electricity per hour. (120 Watts = 1 Amp of AC power) 8 Amps draw of electricity (9 x 100-Watt light bulbs) are approximately the equivalent of 960 Watts or just under 1 kW (1000 Watts of power).
 a. Starting Load
Some appliances require an initial surge of power to start up, called a Starting Load (or Peak Surge). The Starting Load is considerably higher than the Continuous Load and must be considered when sizing the inverter, the battery and the cables that connect the two.
Watts x 2 = Starting Load*
*This is an approximation. Some appliances may require a greater starting load (3 to 7 times the continuous rating).
 b. Continuous Load
The Continuous load of your application is the amount of power it needs to run over the long term. Once started, an appliance needs less power to continue operation than it needed to start up.
Amps x 120 (AC Voltage) = Watts*
*This is an approximation.

 5. What is the Difference Between Solid State and Heavy Duty?
Most inverters in use (including utility and Telecom applications) are of solid state electronic construction, and are adequate for most light duty applications.  Industrial loads with frequent starting surges (as with pumps, compressors, big fans, heavy power tools) and applications with long run requirements will require industrial quality inverters with transformer based technology. Heavy duty applications require heavy duty inverters. Heavy duty applications will often damage a light duty quality inverter unit.

 6. What is the Difference Between an Automotive Cranking and Deep Cycle Battery?
Automotive batteries are usually adequate for small inverters, (< 500 Watts). When used in a car, we suggest you run the vehicle of your engine occasionally while operating your inverter. If you use the inverter while the engine is off, you should start the engine regularly and let it run to charge the battery. Deep Cycle (marine) batteries are best for larger inverters as they are designed for several hundred charge/discharge cycles. (Automotive batteries wear out much more quickly after heavy discharge).

 7. How Do I Charge the Battery For My Inverter?
Because inverters operate from a DC (Direct Current) power source, usually a battery bank (one or more batteries), the battery source will have to be recharged at some point. (Remember that a battery discharged more than 50% is probably close to being dead.) Most cars and trucks recharge their batteries from an onboard alternator. Depending on the inverter load and runtime required, most power use applications will be covered by the charged battery, augmented by the operating alternator supplying a continuous charge to the battery. If the load is large (air conditioner, large draw power tools, large microwave, food freezer, ice cream machine, etc.), verify that the installed vehicle alternator is of large enough capacity to operate the vehicle's power requirement as well as to fulfill the capacity of the inverter load. If not, a motor throttle installation may be required to carry a small load, a larger alternator may be required, or a larger alternator, battery isolator and additional onboard battery bank may be required in order to meet the power requirement of your large load. Remember: it takes 10 DC Amps to run 1 AC Amp of power.

 8. How Long Can I Run the Inverter on my Battery?
To run the inverter from a battery bank over a long period of time, you will need to meet the continuous load demands of the appliance. To calculate this power drain on your battery, it is first necessary to estimate the reserve power (Amp/Hour) of the battery, and the Amps the inverter will require. (N.B. It will take approximately 10 DC Amps to power 1 AC Amp of power use.)
Typically, every battery has a Reserve Minutes rating marked on its label, next to the Cold Cranking Amps rating. The reserve minutes multiplied by 0.3 tells you the battery Amp/Hour reserve power.
Reserve Minutes x 0.3 = Amp/Hours (E.g.: 150 x 0.3 = 45 A/H)
To estimate the maximum battery power the inverter will require to run an appliance, divide its continuous load wattage requirement by 10.
Continuous Load (Watts) / 10 = Maximum Battery Power (E.g.: 450 / 10 = 45)
(E.g.: 45 A/H / 45 Amp Draw = 1 Hour)
*Large electrical loads will require large battery banks to power them. Batteries will only discharge to 50% of their rating. Sizing a battery bank reserve is often complex and we suggest giving us a call to discuss your application..

 9. Are there any Safety Precautions to Keep in Mind?
Improper use of a Power Inverter could result in personal injury. Please read this carefully.  The inverter should not be installed in the engine compartment of a vehicle. Keep the inverter free from moisture as liquids conduct electricity, which may lead to serious damage or injury! Do not use the inverter near flammable materials or where fumes or gases may accumulate.
Frequently Asked Questions About Power Inverters 1. What is a Power Inverter? 2. How can an inverter be used? 3. What is the difference between Square, Modified & Pure Sine Wave?   a. Square Wave   b. Modified Sine Wave   c. Pure Sine Wave 4. What size inverter do I need?   a. Starting Load   b. Continuous Load 5. What is the difference between Solid State and Heavy Duty? 6. What is the difference between...
[Show More]


What is a Power Inverter?

How can an inverter be used?

What is the difference between Square, Modified & Pure Sine Wave?

Square Wave

Modified Sine Wave

Pure Sine Wave

What size inverter do I need?

Starting Load

Continuous Load

What is the difference between Solid State and Heavy Duty?

What is the difference between Automotive and Deep Cycle batteries?

How do I charge the battery for my inverter?

How long can I run the inverter on my battery?

Are there any safety precautions to keep in mind?

This product was added to our catalog on Monday 27 April, 2015.

Share with: