Further Discounts may be available. Call us for details.
We Ship Worldwide

Model: PT-40U

NewMar PT-40 Battery Charger, Phase Three Series, 12 Volt DC
Contact Information

NewMar

NewMar PT-40 Battery Charger, Phase Three Series, 12 Volt DC

Intended for 80 - 400 amp hour capacity batteries, the NewMar PT-40 Battery Charger, Phase Three Series, 12 Volt DC boosts the reliability and safety of your vessel via the use of redundant, independent charger modules. Each power module works independently of the others, so if one breaks down, you don't lose power - simply swap out the faulty module while the other modules remain operational.

Contact us today for a free consultation!

Specifications
  • Recommended Battery Type: Gel-Cell, Flooded or Sealed Lead-Acid;
  • Input Voltage/Frequency: 90 - 264 VAC, 47-63 Hz.
  • Derate linearly from 100% output @ 105 VAC to 80% output @ 90 VAC
  • Efficiency: 85% typical
  • Output Battery Banks: 3
  • Module Bays: 3
  • Power Factor: .96-.99
  • Weight with Modules Installed: 34 lbs/15.5 kg.

Related Material

NewMar PT-40 Battery Charger Brochure
NewMar Phase Three Battery Charger ABS Certification
NewMar Online Catalog



The PT-40 Battery Charger System can be serviced with no prior specialized training, eliminating the need for technical personnel just for this task. In the event of a module malfunction, the faulty module is easily replaced without any wires to fiddle with. You won't even need to remove the battery case to make the swap!

NewMar PT-40 Battery Charger System

Serviceability
  • No technical training needed.
  • Swap faulty modules in moments.
  • Remaining modules stay operational throughout.
  • System status indicators and diagnostics.
  • Universal input.
  • Rapid recharge.

NewMar PT-40 Features
  • Rapid charging with "smart" three phase charging system.
  • Battery type selector switch: gel-cell, lead-acid, AGM
  • Temperature compensated output (option)
  • Diagnostic and system indicators
  • Universal input of 90-264 VAC, 50-60 Hz.
  • Powder coated stainless steel case
Intended for 80 - 400 amp hour capacity batteries, the NewMar PT-40 Battery Charger, Phase Three Series, 12 Volt DC boosts the reliability and safety of your vessel via the use of redundant, independent charger modules. Each power module works independently of the others, so if one breaks down, you don't lose power - simply swap out the faulty module while the other modules remain operational. Contact us today for a free consultation! ...
[Show More]


Contact us today for a free consultation!

NewMar PT-40 Battery Charger Brochure

NewMar Phase Three Battery Charger ABS Certification

NewMar Online Catalog

This product was added to our catalog on Monday 11 July, 2022.

Share with: