Further Discounts may be available. Call us for details.
We Ship Worldwide

Model: JSB-196GM-A2 - DISCONTINUED

JRC JSB-196GM-A2 with DSC, 150 Watts - DISCONTINUED
Contact Information

JRC Marine

JRC JSB-196GM-A2 with DSC, 150 Watts - DISCONTINUED

JRC JSB-196GM MF/HF Radiotelephone with DSC
JRC Model: JSB-196GM

GMDSS A-2 Version with DSC

More Information on JRC JSB-196GM MF/HF Radiotelephone:
JRC JSB-196GM MF/HF Radiotelephone Brochure


JRC JSB-196GM MF/HF Radiotelephone HD Video Playlist:


The JRC JSB-196GM MF/HF radiotelephone is a new generation of economical marine transceiver. Its high functionality design complies with the GMDSS A2 area requirements. The JSB-196GM fully meets the latest regulations for maritime MF/HF communications by connecting the NCT-196 DSC terminal with a built-in watchkeeping receiver. The radiotelephone system consisting of the JSB-196GM, covering the frequency range of 1.6 to 27.5MHz and the NCT-196 DSC terminal with internal DSC watchkeeping receiver conform to the applicable regulations, including the IMO performance and national standard.

JRC JSB-196GM MF/HF Radiotelephone Provides
Digital Signal Processing (DSP)
The JRC JSB-196GM radiotelephone uses a 32 bit floating point for digital signal processing after the IF stage. The DSP technology improves a wide range of functions, including noise reduction and various types of interference rejection, ensuring enhanced performance.


JRC JSB-196GM MF/HF Radiotelephone Makes For Easy Operation
The JRC JSB-196GM is designed for user-friendly operation, using a single, large control dial button for frequency channel selection, mode setting and high/low power transmit switching. The NCT-196 integrates the DSC modem and watchkeeping receiver, enabling convenient operation that also fully meets the GMDSS requirements.

JRC JSB-196GM MF/HF Radiotelephone Allows Easy Installation
The components are very compact designed, allowing for simple onboard installation, even on smaller ships. The GMDSS based system consists of the JRC JSB-196GM MF/HF radiotelephone, the NCT-196 DSC terminal and a DC-DC converter. The main unit of the JSB-196GM and the NCT-196 can be integrated as a stacked system, and can be installed easily on the bridge.
 
JRC JSB-196GM MF/HF Radiotelephone General Information
The radiotelephone system consisting of the JSB-196GM that covers the frequency range of 1.6 to 27.5MHz and the NCT-196 DSV terminal with an internal DSC watchkeeping receiver conforms to the applicable regulations including the IMO performance standard and the national standard.
 
JRC JSB-196GM MF/HF Radiotelephone FEATURES  
Simple installation on small ship
  Each equipment if of very compact design for simple installation on small ship. The GMDSS-based system consists of the JSB-196GM MF/HF Radiotelephone, the NCT-196 DSC Terminal and a DC-DC converter. The main unit of the JSB-196GM and the NCT-196 can be integrated as a stacked system and installed in a easy-to-operate place on the bridge.
   
High expandability
  The JSB-196GM can provide the HF E-mail communication capability by connecting a dedicated modem and a general-purpose personal computer.
 
Easy operation
  The JSB-196GM is designed for user-friendly operation using a single large control dial for frequency channel selection, mode setting and high/low transmit power switching. The NCT-196 integrates the DSC modem and the watchkeeping receiver in it, enabling operations to fully meet the GMDSS requirements.
   
Digital signal processing(DSP)
  The JSB-196GM radiotelephone uses 32-bit floating point DSP for digital signal processing in and after the IF stage. The DSP technology improves a number of functions including noise reduction and various types of interference rejection, ensuring enhanced performance.
JRC JSB-196GM MF/HF Radiotelephone TECHNICAL FEATURES
General Frequency range Transmit: 1.6 to 27.5MHz
Receiver: 0.1 to 29.9999MHz
Frequency increments 100Hz
Frequency tolerance ±10Hz or better
User definable channels 200ch(20ch 10Groups)
Emissions mode J3E A1A, F1B:920 A1A:519 and H3E(Reception only)
Preset ITU channels 1722ch(SSB:283, F1B:920, A1A:519)
Scanning channel 20 user defined channels
Communication mode Simplex and semi-duplex
Antenna impedance 50ohms
Operating temperature -15degC to +55degC
Power requirements DC13.6V±10%, (12.3VDC to 15.0VDC),
negative-grounded.
Tx:40A max
Rx:2A max
(Operable between 10.2VDC and 16.2VDC)
Compass safe distance 1.5m
Dimensions and mass 250mm(W) × 100mm(H) × 260mm(D), Approx. 7.4kg
TRANSMITTER Output power 100Wpp(1.6 to 4MHz)
150Wpp(4 to 27.5MHz)
Occupied bandwidth J3E: 3kHz or better
F1B, A1A: 0.5kHz or less
Carrier suppression 40dB or better
Spurious suppression 43dB or better
AF frequency response 350 to 2700Hz(60dB bandwidth)
Microphone input 600ohms
Line input 600ohms, 0dBm(balanced)
RECEIVER Receiving system Triple superheterodyne
Intermediate frequencies 70.455MHzA455MHzA20.217MHz
 
Sensitivity(SINAD 20dB) J3E:
6.3uV or better (1.6 to 4MHz)
3.5uV or better (4 to 27.5MHz)

F1B:
1.8uV or better (1.6 to 4MHz)
1.0uVor better (4 to 27.5MHz)
Selectivity J3E:
6dB bandwidth 2.4 to 3kHz
66dB bandwidth with in ±2.1kHz

F1B:
6dB bandwidth 270 ∼ 300Hz
60dB bandwidth with in ±550Hz
Spurious response 60dB or better
Clarifier range ±200Hz in 1Hz steps
AF output 5.0W max. 1W rated
Line output 600ohms, 0dBm(balanced)
NFC-196
ANTENNA TUNER
Frequency range 1.6 to 30MHz
Power capability 200Wpp
SWR after tuning 2 : 1
Turning time Automatic tuning: typical 3sec
Preset tuning: typical 0.5sec
Operating temperature -30degC to +60degC
Power requirement 10.2VDC to 16.2VDC negative-grounded 1.5A(max)
Dimensions and mass 230mm(W) × 380mm(H) × 90mm(D), Approx. 3.3kg
NCT-196
DSV TERMINAL
Protocol ITU-RM.493-7, M.541-6 and M.1082
Modulation rate 100 baud
Modulation accuracy Within ±30ppm
Output frequency 1700Hz ±85Hz
Frequency tolerance ±0.5Hz or better
Output level -20dBm to +10dBm
Operating temperature -15degC to +55degC
Power requirement 10.2VDC to 16.2VDC, negative-grounded, 3A max
Dimensions and mass 250mm(W) × 100mm(H) × 260mm(D), Approx. 4.8kg
WATCH KEEPING
RECEIVER
Receiving system Double superheterodyne
Receiving frequencies 2187.5kHz, 4207.5kHz, 6312.0kHz, 8414.5kHz, 12577.0kHz, 16804.5kHz
Sensitivity Character error rate 1% at receiver input voltage of 1uV
Antenna impedance 50ohms
JRC JSB-196GM MF/HF Radiotelephone STANDARD COMPONENTS
Component Model Q'ty Remarks
MF/HF Radiotelephone JSB-196GM 1  
Included Accessories      
Hand Set NQW-213 1  
Power Cable 7ZCJD0043A 1 L=1m
Accessory Parts JSB-196
ACCESS
1 Spare fuse, terminal, etc
Instruction Manual 7ZPJD0124 1 English
Component Model Q'ty Remarks
Antenna Tuner NFC-196 1  
ATU Control Cable 7ZCJD0044A 1 L=5m
ATU RF Cable 7ZCJD0045 1 L=5m
 
Component Model Q'ty Remarks
DSC Terminal NCT-196 1  
DSC Power Cable 7ZCJD0062 1 L=3m
DSC AF Cable 7ZCJD0071 1 L=1.5m
DSC Control Cable 7ZCJD0072 1 L=1.5m
Spare fuse 5ZFEX00012 2 3A
Bridge Card 7ZPJD0122 1 English
Instruction Manual 7ZPJD0120 1 English
JRC JSB-196GM MF/HF Radiotelephone OPTIONS
Component Model Q'ty Remarks
DC-DC Converter NBG-300 1 input24VDC
Hand microphone NVT-140 1 Curl cable(L=0.5m)
Hand microphone NVT-133 1 Straight cable(L=5m)
 
JRC JSB-196GM MF/HF Radiotelephone with DSC JRC Model: JSB-196GM GMDSS A-2 Version with DSC More Information on JRC JSB-196GM MF/HF Radiotelephone: ● JRC JSB-196GM MF/HF Radiotelephone Brochure JRC JSB-196GM MF/HF Radiotelephone HD Video Playlist: The JRC JSB-196GM MF/HF radiotelephone is a new generation of economical marine transceiver. Its high functionality design complies with the GMDSS A2 area requirements. The JSB-196GM fully...
[Show More]


JRC JSB-196GM MF/HF Radiotelephone Brochure

Share with:

This product was added to our catalog on Friday 14 August, 2015.