The NewMar 12-12-35I Isolated DC to DC Converter is designed to let you use negative ground gear with positive or floating ground battery systems. It is current limiting and short circuit proof, and features two automatic safety shutdowns for added security and reliability: automatic resetting thermal shutdown and high/low input voltage shutdown.
Contact
us today for a free consultation!
Specifications
Output: 13.6 VDC, internally adjustable 12.6...
[Show More]
- 14.5, 24.5 VDC, or specify
Input Voltage: 10-16 (11.5 VDC minimum start-up voltage, then @ 10 - 16 VDC from 1 amp min. to full load)
Ripple: 150 mV P-P maximum
Regulation: 1% Line/Load
Idle Current: Less than 100 mA (including power "ON" light)
Related Material
NewMar 12-12-35I Isolated DC to DC Converter Manual
NewMar Online Catalog
The NewMar 12-12-35I Isolated DC to DC Converter comes ruggedly housed in an anodized aluminum heat sink case for high vibration applications - with an extreme vibration mounting kit as an additional option - and the PC board features a polyurethane conformal coating for further protection.
Features
Wide range of input voltage.
Precise regulation of output voltage.
Reverse polarity.
Front panel terminal block.
Additional Specifications
Switching Frequency: 40 Khz.
Duty Cycle Ratings: Intermittent - 20% duty, 20 mins. max on time, Current limit at approximately 105% of intermittent rating. Continuous - 100% duty, 24 hours
Case Size C-3 (6.0"H x 6.8"W x 16.5"D)
Contact
us today for a free consultation!NewMar 12-12-35I Isolated DC to DC Converter ManualNewMar Online Catalog
