Intended for 14 - 70 amp hour capacity batteries, the NewMar PT-7 Battery Charger, Phase Three Series, 12 Volt DC increases safety and reliability through the use of redundant, independent charger modules. Each charger module works independently of the others, so if one breaks down, you won't automatically lose power - just exchange the faulty module as the others remain operational.
Contact
us
today for a free consultation!
Specifications
...
[Show More]
Recommended Battery Type: Gel-Cell, Flooded or Sealed Lead-Acid;
Input Voltage/Frequency: 90 - 264 VAC, 47-63 Hz.
Derate linearly
from 100% output @ 105 VAC to 80% output @ 90 VAC
Efficiency: 85% typical
6 Cell, 80-400 A-H (per installed module); 240-1200 A-H (per system)
Module Bays: 3
Power Factor: .96-.99
Weight with Modules Installed: 34 lbs/15.5 kg.
Related Material
NewMar PT-7 Battery Charger Brochure
NewMar Phase Three Battery Charger ABS Certification
NewMar Online Catalog
The PT-7 Battery Charger System is designed with ease of use and repair in mind. In the event of a malfunction, there will be no wiring to worry about, and you won't even need to uninstall the case. Simply swap out the faulty power module and keep moving.
Serviceability
No technical training needed.
Swap faulty modules in moments.
Remaining modules stay operational throughout.
System status indicators and diagnostics.
Universal input.
Rapid recharge.
NewMar PT-7 Features
Rapid charging with "smart" three phase charging system.
Battery type selector switch: gel-cell, lead-acid, AGM
Temperature compensated output (option)
Diagnostic and system indicators
Universal input of 90-264 VAC, 50-60 Hz.
Powder coated stainless steel case
Contact
us
today for a free consultation!NewMar PT-7 Battery Charger BrochureNewMar Phase Three Battery Charger ABS CertificationNewMar Online Catalog